Concrete Solutions for architects, engineers and builders since 1974

MoistureBloc

Today’s fast-paced construction demands products that are easy to use while effectively preventing and solving concrete slab moisture issues. With MoistureBloc products, floor covering can be economically installed without costly delays. MoistureBloc will remediate moisture vapor and pH issues on existing floors and properly cure new/fresh concrete, preventing flooring failures due to moisture vapor emissions as high as 27 pounds. Three easy steps to prevent or solve moisture vapor problems.

MoistureBloc Adhesive Remover

Strips adhesives from concrete floors.

MOISTUREBLOC ADHESIVE REMOVER strips adhesives from concrete surfaces with relative ease. Removes many types of adhesives from such as cut back, latex and pressure sensitive.  The product will also clean oil stains from concrete. After use, MoistureBloc Adhesive Remover is emulsifiable with water and general cleaners to yield a concrete surface that is clean and ready for subsequent treatments. To remove coatings such as epoxies, sealers and curing compounds, use MoistureBloc Stripper.

MoistureBloc Flexible Joint Sealant

A breathable two-part epoxy flexible joint filler designed for use on MoistureBloc treated surfaces that require fast-track filling and sealing of moving expansion/ control joints.

MOISTUREBLOC FLEXIBLE JOINT SEALANT is a breathable two-part epoxy flexible joint filler designed for use on MoistureBloc treated surfaces that require fast-track filling and sealing of moving expansion/contraction joints. The product is tough and durable with excellent adhesion and flexibility to resist cracking, as well as high impact and abrasion resistance.

BENEFITS

  • Shaveable in 4-6 hours
  • No heat required for shaving
  • Provides excellent adhesion, flexibility, durability, and resistance to impact, water and abrasion
  • Cures with less than 1% shrinkage or loss in film thickness
  • Available in Concrete Gray
  • Requires no primer

MoistureBloc Floor Cleaner

Cleans grease and oil stains, tire marks and dirt from concrete floors.

MOISTUREBLOC FLOOR CLEANER is an eco-friendly all natural industrial surface preparation cleaner. MoistureBloc Floor Cleaner will effectively and safely clean grease and oil stains, tire marks and dirt from concrete floors receiving MoistureBloc products. MoistureBloc Floor Cleaner is derived from soybean oil which is an environmentally friendly bio based agricultural material making it user safe, low odor and easily cleaned up with water.

BENEFITS

  • Professional strength
  • Removes dirt, grease and oil stains
  • Dilute for economical use
  • Environmentally friendly
  • Made from over 96% renewable resources
  • Safe to use
  • Low odor
  • Solvent free

MoistureBloc FP

Advanced polymer modified cement for the patching and restoration of concrete floors.

MOISTUREBLOC FP uses advanced polymer modified portland cement for the patching and restoration of concrete floors not subjected to concentrated or point loading which will be covered with a flooring material.

BENEFITS

  • Non-shrink, smooth, non-reflective surface
  • One component, just add water
  • Polymer fortified formulation
  • Excellent freeze/thaw resistance
  • Self curing in most applications
  • High compressive, flexural, tensile and bond strength
  • Excellent performance from feather edge to ½ inch thickness
  • Extended working time

MoistureBloc MX AIM System

Low VOC maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

MOISTUREBLOC MX AIM System low VOC, prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX AIM system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Solvent base – Low VOC
  • Cost effective
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Low VOC
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

MoistureBloc MX Emulsion System

Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

Moisturebloc MX Emulsion System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX Emulsion system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Cost effective
  • Low odor
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Low VOC
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

MoistureBloc MX System

Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

MOISTUREBLOC MX System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX System can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Cost effective
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

MoistureBloc One Step

Economical one coat application reduces moisture vapor readings as high as 10 to under 3 lbs. (RH 80%). Adhesive ready in 12 hours.

MOISTUREBLOC ONE STEP is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the product is guaranteed to reduce moisture vapor emissions (MVER) from as high as 10/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc One Step is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.

MoistureBloc One Step can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 10 lbs. to under 3 lbs.
  • Adhesive ready in 12 hours
  • Easy one coat application
  • Does not require shot blasting or other mechanical surface preparation
  • Low odor
  • Resistant to acids, alkalis and reduces the moisture environment which allows mold and   fungus to grow
  • Low installed cost
  • Cures new concrete for fast installation
  • Apply to damp and new concrete surfaces
  • Full floor warranty

MoistureBloc SLU

A high strength and fast setting self leveling underlayment designed to level and smooth interior MoistureBloc treated substrates prior to installation of finished flooring.

MOISTUREBLOC SLU is a high strength and fast setting single component self leveling underlayment designed to level and smooth interior MoistureBloc treated substrates prior to installation of finished flooring. It is intended for use over properly prepared non-porous concrete substrates. Floors can be covered with carpet, linoleum, tile, hardwood or polymer coatings. MoistureBloc SLU contains polymer modified Portland cement combined with high quality fine aggregate to produce a fast-setting, high-strength characteristic.

BENEFITS

  • Ready to use or may be extended with properly graded sand
  • Meets ASTM C33 for high quality aggregate
  • Smooth flowing for pumped or poured application
  • Crack and shrink resistant
  • Can be featheredged
  • Rapid high early strength gain
  • Ready for foot traffic in 4 hours
  • Fast turnaround-ready for surface material in 24 hours
  • Maintains workability for over 30 minutes
  • Reduced sound transmission

MoistureBloc Stripper

Stripper to clean and remove coatings and other residues.

MOISTUREBLOC STRIPPER is an eco-friendly heavy bodied stripper designed for the cleaning and removal of coatings and other residues such as paints, varnishes, urethanes, epoxies, sealers, acrylics, floor waxes and curing compounds from concrete floors receiving MoistureBloc products. MoistureBloc Stripper will penetrate and remove multiple layers of  coatings using less material then traditional stripping products in one application saving time and cost. MoistureBloc Stripper is derived from soybean oil which is an environmentally friendly bio based agricultural material making it user safe, low odor and easily cleaned up with water.

BENEFITS

  • Environmentally friendly
  • Made from over 95% renewable resources
  • Low odor
  • Solvent free
  • Removes multiple coating layers
  • Professional strength
  • Safe to use
  • No petroleum solvents

 

MoistureBloc Surface Bond

Improves the bond between a MoistureBloc treated surface and leveling and patching compounds.

MOISTUREBLOC SURFACE BOND improves the bond between a MoistureBloc treated surface and leveling and patching compounds such as MoistureBloc SLU and MoistureBloc FP. The product comes ready to use and can be re-emulsified when cement topping application is delayed. It provides both chemical adhesion and mechanical bonding between two surfaces and is hard, tough, flexible, and resistant to UV. It also resists damage from freeze-thaw cycles, cracking and shrinkage.

BENEFITS

  • Low odor
  • Resists most common industrial chemicals, heat and freeze-thaw cycles
  • Easy to use
  • Ideal when bonding is delayed
  • Topping can re-emulsify so the two cement surfaces form a strong bond

MoistureBloc Universal

One coat application reduces moisture vapor readings ranging from 8 to under 3 lbs. Use with reactive and non reactive adhesives. Meets all California VOC regulations and LEED point standards. Adhesive ready in 12 hours.

MOISTUREBLOC UNIVERSAL is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. MoistureBloc Universal is ideal for use with urethane and epoxy reactive adhesives. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 8/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc Universal is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.

MoistureBloc Universal can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 8 lbs. to under 3 lbs.
  • Ideal for reactive adhesives
  • Adhesive ready in 12 hours
  • Easy one coat application
  • Does not require shot blasting or other mechanical surface preparation
  • Low odor
  • Resistant to acids, alkalis and reduces the moisture environment which allows mold and fungus to grow
  • Low installed cost
  • Cures new concrete for fast installation.
  • Apply to damp and new concrete surfaces
  • Full floor warranty

MoistureBloc Vapor Reduction System (VRS) Emulsion

Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

MoistureBloc Vapor Reduction System (VRS) FT

Cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.

MoistureBloc Vapor Reduction System (VRS) FT AIM

Low VOC cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.

Promotions/Specials

Gurad/Film Forming Sealers

Penetrating Sealer and Concrete Curing in one easy-to-use product.