Concrete Solutions for architects, engineers and builders since 1974

StarSeal PS Clear

High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance densified concrete floor. StarSeal PS Clear is a high solids potassium based silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide in the concrete producing a stronger more durable, dust free, superior looking and performing long lasting concrete floor.

BENEFITS

  • Long lasting and extremely durable
  • High solids forumation
  • No scrubbing or rinsing required
  • Eliminates or reduces waste stream during installation
  • Odorless, non-hazardous, USDA approved
  • Easy to clean
  • LEED points
  • Abrasion, wear resistant
  • No topical film to wear through
  • Performance warranty
  • Low maintenance. No waxing or resurfacing required

 

StarSeal Protect MFS

Magnesium fluorsilicate floor hardener and dust-proofer. Chemically bonds with concrete to produce a dense, abrasion resistant and breathable floor that is highly resistant to most acids and chemicals.

STARSEAL PROTECT MFS is a magnesium fluorosilicate hardener and dust proofer formulated to chemically bond with concrete to produce a dense, abrasion resistant and breathable floor. StarSeal Protect MFS treated floors are functional, attractive and highly resistant to most acids and chemicals.

BENEFITS

  • Chemically reacts to harden and densify
  • Extends service life of floor
  • Non-film forming reduces maintenance
  • Provides greater abrasion and chemical resistance
  • Reduces dusting
  • Protects against absorption of oils and grease

StarSeal EF Hardener 204

Economical, odorless dust proofing and hardening treatment, improves chemical and wear resistance.

STARSEAL EF HARDENER 204 is a water white silicate based solution that produces chemical hardening of concrete surfaces. It is formulated with proprietary additives to encourage maximum penetration and to minimize dusting.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Reduces dusting
  • Allows for bonding of all finishes
  • Rehabilitates old worn floors by chemically reacting to provide a hard and durable surface
  • Meets requirements of Federal Specification CE-204
  • Economical

Certi-Vex Re-Seal It

Improves the appearance of aged or weathered previously sealed concrete surfaces. The product "melts" into the existing sealer binding the new sealer coat to the existing sealer.

CERTI-VEX RE-SEAL IT is specifically designed to improve the appearance of aged or weathered previously sealed concrete surfaces.The products low viscosity allows for easier application, better breathability and adhesion to the existing sealer.

BENEFITS

  • Non-Yellowing
  • Fast drying
  • Rejuvenates old and worn surfaces
  • Easy to use
  • VOC compliant

Certi-Vex Guard CACS

Colored one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD CACS is a colored, ready to use, breathable one-step penetrating silane water repellent cure and seal that provides maximum long term protection and a decorative appearance to concrete and masonry surfaces. Water and dissolved salts bead after 24 hours, Chloride Ion intrusion is reduced; protects against staining and damage caused by water, salts, deicer chemicals and acids. Applied on new or existing horizontal and vertical surfaces, it immediately penetrates the pores and capillaries of the concrete, reacting with the alkali and moisture to form a hydrophobic gel in the pores and a colored water retentive coating which seals the surface.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetration water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in on application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Available in 50 standard plus custom colors. See Vexcon’s Color Systems Chart
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Excellent color retention (fade resistant)

Certi-Vex Aggregate Sealer AIM

Low VOC pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight and enhance the natural color of the expose aggregate.

CERTI-VEX AGGREGATE SEALER AIM is a ready to use low VOC high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer AIM provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • Low VOC <350 grams/liter
  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex Aggregate Sealer

Pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight the natural color of the aggregate enhancing the aggregate appearance.

CERTI-VEX AGGREGATE SEALER is a ready to use high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex AC 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

CERTI-VEX AC 1315 CONCRETE STAIN is a solvent base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. Certi-Vex AC 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2 Class B
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 BEADING FLAT is a solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 HG

Breathable high solids clear sealer that enhances and protects exterior concrete with a longer lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 HG is a premium high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315

Breathable clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 is a solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 30%

Cost effective 30% solids breathable clear sealer that enhances and protects concrete with a long lasting UV resistent high gloss finish.

CERTI-VEX AC 30 is a high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 30 leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 30 provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart a high gloss to colored and natural concrete surfaces. Certi-Vex AC 30 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class B
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 25

Clear 25% solids breathable clear sealer that enhances and protects concrete with a UV resistant, durable gloss finish.

CERTI-VEX AC 25 is a solvent base clear curing, sealing, hardening, dustproofing and water repellent coating. The product provides for proper cement hydration and development of the concrete’s strength and durability, provides good protection from the damaging effects of water penetration and staining and is resistant to UV exposure. Certi-Vex AC 25 feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where gloss and shine is required and is a excellent base for most adhesives, paints and a variety of topcoats. Certi-Vex AC 25 meets the requirements of the Tile Adhesion Test of the Resilient Tile Institute and the Tile Adhesion Test Requirements of ASTM-C-1315.

BENEFITS

  • Economical solvent base cure and seal
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 1 Class B
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal Flat

Low VOC breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 SUPER SEAL FLAT is a low VOC solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Super Seal Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Low VOC <350 grams/liter
  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Gloss

Highest solids sealer provides superior long term protection and gloss, fast drying, non yellowing and low VOC.

CERTI-VEX AC 1315 SUPER GLOSS is the highest solids cure and seal coating on the market today offering superior gloss and longer term performance. Certi-Vex AC1315 Super Gloss quickly forms a clear film that is tough, chemical and slip resistant, water repellent, dustproof, and non-yellowing. Certi-Vex AC1315 Super Gloss features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications on new and existing concrete floors, stamped and decorated concrete surfaces where superior gloss and long term performance is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Non-Yellowing
  • Superior film gloss
  • Best wear resistance
  • Meets ASTM C-1315 Type 1 Class A
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent protection against staining, attack by alkali, oil, salt, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal HG

Low VOC high solids breathable clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 SUPER SEAL HG is a premium high gloss, low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, high gloss shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal

Low VOC breathable fast drying clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 SUPER SEAL is a low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 309

Low VOC economical breathable sealer that protects concrete with a low gloss clear non-yellowing finish.

CERTI-VEX AC 309 is a low VOC fast drying curing, sealing, hardening and dust proofing clear coating that provides weather and chemical resistance to a wide variety of concrete surfaces. The product is ideal for use on new or existing exterior and interior above and  below grade architectural concrete where a durable, slip resistant and low gloss appearance is desired.

Certi-Vex AC 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

 

BENEFITS

  • Non-Yellowing. Surface remains clear
  • Fast drying
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean up and maintenance
  • Can be applied at temperatures as low as 20°F/-6°C
  • Economical
  • Protects against rain, sun, freezing temperatures, alkali and common industrial chemicals, oil, grease, de-icing salts, cleaners, airborne soot, dust and other pollutants
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Surfaces look newer and brighter
  • Re-coatable

StarSeal 800

Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

STARSEAL 800 is a valued price high solids curing, sealing, hardening, dust proofing and water repellent coating. Easily to apply, StarSeal 800 quickly forms a hard, crystal clear medium gloss coating that is resistant to yellowing and many chemicals. StarSeal 800 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Surface remains clear
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Excellent base for adhesives
  • Meets ASTM C-309
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Low odor

StarSeal 309

Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

STARSEAL 309 is a economical water base curing, sealing, hardening, dust proofing, and water repellent coating. StarSeal 309 forms a crystal clear low gloss coating that protects and seals new and existing concrete surfaces. StarSeal 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Meets ASTM C-309
  • Seals and hardens surface reducing clean-up and maintenance
  • Protects against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Low odor

Promotions/Specials

Gurad/Film Forming Sealers

Penetrating Sealer and Concrete Curing in one easy-to-use product.